Electric Tugs

Electric Power Tugs from Multi-Mover

6 different sizes available

  • S15 up to 1,500 Kg
  • M18 up to 1,800 Kg
  • L25 up to 2,500 Kg
  • XL from 3,500 up to 7,500 Kg
  • XXL up to 20,000 Kg
  • 3XL up to 40,000 Kg

The Multi-Mover enables you to move your trailer over a flat or even a slightly sloping surface. Due to the specially designed tyres and drive via a differential all Multi-Movers electric tugs can be used on both hard and soft surfaces.

The Multi-Mover

The multi-deployable hand truck :

  • Compact and versatile
  • Maintenance-free
  • Various couplings available
  • For inside and outdoor use
  • Various tyre types available
  • CE with Declaration of Conformity

Our maintenance-free motors are highly functional and effective. Forceful acceleration, excellent brakes and fast switching between forward and reverse. You do not need a driver's license to use the Multi-Mover.

The Multi-Mover is made in the Netherlands.

Easy to charge

Charge through the supplied charger from a power outlet. The charger is protected from overloading and is quiet and efficient.

Multi Mover S12 Power Dolly Specifications

  • 2 x 300 Watt (600 Watt)  maintenance-free 24 VDC motor
  • Motor brake and an Electric magnetic brake
  • Electronic differential drive
  • 12V 26 Ah (2 batteries) Exchangable Battery-Pack, Maintenance-free, Gel
  • 24V 5A trickle charger internal
  • Pull - and push capacity 1200 kg.
  • Different types of hydraulic and manual hitches available
  • Continental S10 Solid tyres 10 cm width, 4 inch rims, normal profile
  • Tillerhead
  • Potentiometer, continuous
  • Battery Discharge Index and error indication
  • Battery saving program
  • Speed forward and reverse: 0 through 5 km/h continuously
  • Minimum speed: 0.1 km/h
  • Weight: 110 kg
  • Width: 42 cm
  • Height 99 cm
  • Length 94 cm (standard hitch included)
  • Two years guarantee, Part list and Manual
  • CE and Declaration of Conformity

Always supplied with batteries, charger and a coupler. It is ready for use.

Multi Mover S15 Electric power tug

Download Manual - Multi-Mover S15

The Multifunctional Multi-Mover S

The Multi-Mover S15  tow tug enable you to easily move and accurately manoeuvre your trolley or bins up to 1500 kg  over a level surface.  Because of its special tyres and robust motor the Multi-Mover may be deployed on both hard and soft surfaces. You may use the Mover at school, in the hospital, in the storage basement, on the work floor and many other locations.  You can use the Multi-Mover on slopes as well.

The Multi-Mover is multi-deployable

It can pull linen cages or waste skips, park a small trailers, move luggage trolleys and manoeuvre wast bins into the storage box. This model cannot be used for car trailers.

You’ll never need to push or pull a trailer yourself anymore.

The Multi-Mover S15 electric hand truck functions 3 to 4 days long on 1 battery load and is multi-deployable again after a 3-4h recharge by means of the charger supplied with it. There are a couple of options such as an special hitches or non-marking tyres

  • 500 W maintenance-free 24 VDC motor
  • Motor brake and an Electric magnetic brake
  • Differential drive
  • 12V 70 AH (2 batteries) Maintenance-free AGM
  • 24V 8A trickle charger internal
  • Pull - and push capacity 1500 kg. 900 Newton torque
  • Exchangeable coupler
  • Continental S10 Solid tyres 10 cm width, 4 Inch rims, normal profile
  • Tillerhead
  • Potentiometer, continuous
  • Battery Discharge Index and error indication
  • Battery saving program
  • Speed forward and reverse: 0 through 5 km/h continuously
  • Minimum speed: 0.1 km/h
  • Weight: 150 kg
  • Width: 48 cm
  • Height 114 cm
  • Length 59 cm
  • Two-years guarantee, Part list and Manual
  • CE and Declaration of Conformity
  • English Operating Manual, Part List.

Always supplied with batteries, charger and a coupler. It is ready for use

Operation

Tiller head

  • The tiller head serves for driving; you will find a freewheel handle, battery discharge indicator, charger plug and lock on the motor casing.

Operation

  • The Multi-Mover S is easy to operate
  • The tiller shaft is hinged and can be put upwards for easy turning.
  • Steering grip (black)
  • The steering grip with bail is a fixed Multi-Mover component.

Operation elements

  • Safety switch (red) (Belly Button)
  • With the driving switch activated, pressing the safety switch (in case of crushing hazard) will immediately halt the Multi-Mover S or make it move in the opposite direction until the driving switch is released.
  • Driving switches left and right from the centre.
  • Turning the switch forward with your thumb, you first select the drive direction. Turning it farther forward the Multi-Mover S starts moving. Middle position is neutral.
  • Turning the switch downward the Multi-Mover S will move backwards.
  • Continuous potentiometer (lright)
  • Thumb control for continuously setting maximum speed from 0.1 to 5.0 km /h. Also at full speed you will be able to drive and manoeuvre accurately.
  • Claxon
  • Optionally also a claxon may be installed.

Multi-Mover S Options

Tyres

By default Multi-Mover S is delivered with 4 inch solid tyres and a hard rubber castor wheel. As a option you can order non-marking wheels (Continental SC10 as well) and a non marking castor wheel.

Couplings

By default the Multi-Mover S  is delivered with a norma hitch. In case you wish a coupler on a different height or another coupling device, please have a look at Couplings here.

Claxon

Warning claxon

Charger

The Multi Mover S comes with an internal charger. Option: External charger

Other colours

Various RAL  colours

Pincode

Multi-Mover M up to 1800 kg

Download Manual - Multi-Mover M18

The Multifunctional Multi-Mover

The Multi-Mover M18 electric tug enables you to easily move and accurately manoeuvre your trailer or trolleys up to 1800 kg over a level surface (up to 4%).  Because of its special tyres and robust motor the Multi-Mover may be deployed on both hard and soft surfaces. You might use the Mover at a riding school, at a camping site, a caravan showroom, on the work floor and many other locations.

The Multi-Mover M is is first model Multi-Mover made since 2005.

The Multi-Mover is multi-deployable.

It can pull a twin-axle trailer out of a warehouse, park a horse trailer, move luggage trolleys and manoeuvre boat trailers.

You’ll never need to push or pull a trailer yourself anymore.

The Multi-Mover pedestrian tug functions a whole day long on 1 battery load and is multi-deployable again after a 3h-recharge by means of the charger supplied with it.

Multi Mover M Trailer Tug Specifications

  • 500 W maintenance-free 24VDC motor
  • Motor brake and an Electric magnetic brake
  • Differential drive
  • 12V 26 AH (2 batteries) Maintenance-free AGM
  • 24V 5A trickle charger
  • Pull - and push capacity 1800 kg. 950 Newton Torque
  • Pneumatic tyres 15 cm width, on a 6 inch rim turf profile
  • Solid swivel castor 200mm diam.
  • Ergonomic Tillerhead, Belly Button
  • Potentiometer, continuous
  • Battery Discharge Index and error indication
  • Battery saving program
  • Speed forward and reverse: 0 through 5 km/h continuously
  • Minimum speed: 0.1 km/h
  • Maximum load on the ball: 250 kg
  • Weight: 85 kg
  • Width: 80 cm (70 cm with narrow tyres)
  • Height 95 cm (71 cm with folded tiller tube)
  • Length 165 cm (110 cm with folded tiller tube)
  • Two exchangeable couplers at 66 cm height, a pin and a ball
  • Two years guarantee
  • CE Declaration of Conformity
  • English Operating Manual, Part List.

Always supplied with batteries, charger and 2 couplers. It is ready for use

Watch more videos here

Operation

Tiller head

  • The Mover is operated by means of the tiller head. The freewheel-handle and the charger plug are on the engine casing.
  • The tiller head tube is hinged and can be folded in for storage or transport.
  • Ergonomic tiller head provided with controls.
  • Steering grip (black)
  • The steering grip with bail is a fixed Multi-Mover component.

Operation Elements

  • Driving switches left and right from the centre. (yellow)
  • Middle position is neutral.
  • Turning the switch forward with your thumb, you select the drive direction. Pressing the switch further, speed is continuously regulated. Turning the switch downward the Multi-Mover will move backwards.
  • Belly button safety switch (red)
  • With the driving switch activated, pressing the safety switch (in case of crushing hazard) will immediately halt the Multi-Mover or make it move in the opposite direction until the driving switch is released.
  • On- and off -switch (left)
  • Continuous potentiometer (right)
  • Sliding button for continuously setting maximum speed from 0.1 to 5.0 km /h. Also at full speed you will be able to drive and manoeuvre accurately.
  • Battery LED (top)
  • Light. Indicates state of battery charge. It also indicates error codes in case of malfunctioning.
  • Signal Horn is an option

Uncoupling

Put on the hand brake and adjust the Multi-Mover’s nose wheel. Slide the potentiometer to slow and move slowly backwards. The Multi-Mover will gradually move away from under the drawbar to its normal height (45cm).

In case no nose wheel is present, you are to lift the drawbar from the coupler. You may also try to uncouple standing next to the Multi-Mover.

Multi Mover M18 Options

Tyres

By default Multi-Mover is delivered with normal pneumatic tyres with a turf profile and a hard rubber castor wheel.

However, we offer various tyre types as options. For interior and outdoor use and for all seasons. For tyres, please have a look here

Couplings

By default the Multi-Mover M  is delivered with a ball and pin on 66 cm height. In case you wish a coupler on a height of 45 cm (usual height for towing hook) we can mount a coupler plate. See the pictures left, you can mount your tow bar or other couplers at various heights.

If you are looking for  another coupling device, please have a look at Couplings here

Claxon

Warning claxon

Other colours

Various RAL colours

Multi-Mover L 2500 Kg

Download Manual - Multi-Mover L25Charger Manual

The Multi-Mover L electric tug enables you to easily move and accurately manoeuvre caravans, trailers and trolleys up to 2500 kg. Because of its special tyres and robust motor the Multi-Mover may be deployed on both hard and soft surfaces. You may use the pedestrian tow tug in the factory, in the stable, in the caravan showroom, on the work floor and in many other locations.

The Multi-Mover L is multi-deployable and with respect to other Multi-Movers very compact, foldable and consequently easy to transport. This model is ideal for single axle trailers. You can choose between a steel and stainless steel version. Ideal for the food sector or cattle farms.

You’ll never need to push or pull a cart or trailer yourself anymore.

The Multi-Mover functions a whole day long on 1 battery load and is multi-deployable again after a 5h-recharge by means of the charger supplied with it.

Multi Mover e-Dolly Specifications

  • 800 W maintenance-free 24VDC motor
  • Motor brake and an Electric magnetic brake
  • Differential drive
  • 12V 50 AH (2 batteries) Maintenance-free AGM
  • 24 V 8A trickel charger
  • Pull and push capacity 2500 kg, 1400 Newton.
  • Pneumatic tyres 15 cm/6 Inch width, normal profile
  • Solid swivel castor, 230mm diam.
  • Ergonomic Tillerhead with belly button
  • Potentiometer, continuous
  • Battery Discharge Index and error indication
  • Battery saving programme
  • Speed forward and reverse: 0 through 5 km/h continuously
  • Minimum speed: 0.3 km/h
  • Maximum load on the ball: 300 kg
  • Weight: 180 kg
  • Width: 80 cm ( 70 cm with narrow tyres)
  • Height: 95 cm (71 cm with folded tiller tube)
  • Length: 120 cm (110 cm with folded tiller tube)
  • Ball coupler op 45 cm height - Pin coupler on 66 cm height
  • On the front side a 2x M10 thread has been applied for various couplings to be screwed on. On 20, 30 and 40 cm height.
  • Always supplied with batteries, charger and 2 couplers.
  • Two-years guarantee
  • CE Declaration of Conformity
  • English Operating Manual, Part List.
Multi-Mover L25 Müllcontainer

Watch more videos here

Operation

Multi-Mover L with a steel or stainless steel frame

  • The Multi-Mover L is easy to operate

Steering : Tiller Head

  • The Mover is operated by means of the tiller head. The freewheel-handle and the charger plug are on the engine casing. The tiller head shaft is hinged and can be folded in for storage or transport.

Operation

  • The Multi-Mover L is very compact and consequently easy to manoeuvre. You can easily turn around in narrow alleys and corridors.
  • The stainless steel version is very economical compared with other stainless steel tractors.
  • Ergonomic tiller head with controls.

Steering grip (black)

  • The steering grip with bail is a fixed Multi-Mover component.

Operation elements:

  • Driving switches left and right from the centre. (yellow)
  • Middle position is neutral
  • Turning the switch forward with your thumb, you select the drive direction and are able to continuously regulate your speed. Turning the switch downward the Multi-Mover will move backwards.
  • 'Belly button' Safety switch (red)
  • With the driving switch activated, pressing the safety switch (in case of crushing hazard) will immediately halt the Multi-Mover or make it move in the opposite direction until the driving switch is released.
  • On- and off -switch (left)
  • Continuous potentiometer (right)
  • Sliding button for continuously setting maximum speed from 0.3 to 5.0 km /h. Also at full speed you will be able to drive and manoeuvre accurately.
  • Battery LED (top)
  • Light. Indicates state of battery charge. It also indicates error codes in case of malfunctioning.

Multi Mover L Options

Tyres

By default the Multi-Mover electro tug is delivered with normal pneumatic tyres and a hard rubber castor wheel.

However, we offer various tyre types as options. For interior and outdoor use and for all seasons.

  • 4 Inch, ground clearance 7 cm : turf-profile and full rubber only.
  • 6 Inch, ground clearance 9 cm : turf-profile, snow tyres and full rubber only.
  • 8 Inch, ground clearance 11 cm :  turf-profile, snow tyres, chevron tyres and full rubber.

Special tyres and non-marking available.

Castor wheels available in single, double and pneumatic.

Couplings

By default the Multi-Mover M is delivered with a ball and pin on 66 cm height. In case you wish a coupler on a height of 45 cm (usual height for towing hook) or another coupling device, please have a look at Couplings here

Internal charger

Built-in charger with outlet and charging indication light.

Weight plates

For improved traction, 15 or 20 Kg a piece.

Claxon

Warning claxon.

Other colours

Various RAL colours.

Multi-Mover XL pedestrian power tug

Up to 3,500 kg, 5,000 kg or 7,500 kg.

The pedestrian electric tow truck for professionals

The Multi-Mover XL enables you to easily move and accurately manoeuvre trailers, trolleys or flatbed-trailers over a level surface. Because of its special tyres and robust motor the Multi-Mover XL may be deployed on both hard and soft surfaces. The Multi-Mover can be used in the factory, stable, camping, showroom, on the work floor and in many other locations.

There are 3 models Multi-Mover XL : the XL up to 3500 Kg, the XL+ up to 5000 Kg and the XL2 up to 7500 KG (4500 Newton).

The Multi-Mover is multi-deployable.

It can pull a boat from a hangar, move luggage trolleys and containers. as well as manoeuvre heavy plant machinery on their place in a factory hall.

You’ll never need to push or pull a trolley or trailer yourself anymore.

The Multi-Mover functions for two working days on 1 battery load and is multi-deployable, odourless, quiet and emission-free again after a 5h-recharge by means of the charger supplied with it.

Multi Mover XL35 Electro Tug Specifications

Download Manual - Multi-Mover XL35Charger Manual

Technical Specifications Multi-Mover XL35 3500 Kg

  • 800 W maintenance-free DC motor, 130A
  • 24VDC
  • Motor brake and an Electric magnetic brake
  • Differential drive
  • 12V 55 AH (2 batteries) Maintenance-free AGM
  • 24V 8A High frequency charger, external
  • Pull- and push capacity 3500 kg, 2000 Newton
  • Pneumatic tyres 15 cm/6 Inch width, normal profile
  • Solid swivel castor, 200mm diam
  • Ergonomic tiller head
  • Potentiometer, continuous
  • Battery Discharge indicator
  • Battery saving program
  • Emergency stop on motor casing
  • Lock with 2 keys
  • Speed forward and reverse: 0 through 5 km/h continuously
  • Minimum speed: 0.1 km/h
  • Maximum load on the ball: 350 kg
  • Weight. 150 kg, or 170 kg with 100 AH batteries
  • Width: 80 cm ( 70 cm with narrow (small) tyres)
  • Height: 95 cm (71 cm with folded tiller shaft)
  • Length: 170 cm (110 cm with folded tiller shaft)
  • Ball coupler on 45 cm height - Pin coupler on 66 cm height
  • On the front side a 2x M10 thread has been applied for various couplings to be screwed on. On 20, 30 and 40 cm height.
  • Two-years guarantee
  • CE Declaration of Conformity, 12 Months German UVV
  • English Operating Manual, Part List.

Always supplied with batteries, charger and 2 couplers. It is ready for immediate use.

Multi Mover XL50 Power Tug Specifications

Download Manual - Multi-Mover XL50Charger Manual

Technical Specifications Multi-Mover XL50 5000 KG

  • 1500 W maintenance-free DC motor, 200A
  • 24VDC
  • Motor brake and an Electric magnetic brake
  • Differential drive
  • 12V 55 AH (2 batteries) Maintenance-free AGM
  • 24V 8A High frequency charger, external
  • Pull- and push capacity 5000 kg, 2800 Newton
  • Pneumatic tyres 15 cm/6 Inch width, normal profile
  • Solid swivel castor, 200mm diam
  • Ergonomic tiller head
  • Potentiometer, continuous
  • Battery Discharge indicator
  • Battery saving program
  • Emergency stop on motor casing
  • Lock with 2 keys
  • Speed forward and reverse: 0 through 5 km/h continuously
  • Minimum speed: 0.1 km/h
  • Weight 200 Kg up to 350 Kg
  • Width: 80 cm (70 cm with narrow (small) tyres)
  • Height: 95 cm (71 cm with folded tiller shaft)
  • Length: 120 cm (110 cm with folded tiller shaft)
  • Bar or Ball Coupler
  • On the front side a 2x M10 thread has been applied for various couplings to be screwed on. On 20, 30 and 40 cm height.
  • Two-years guarantee
  • CE Declaration of Conformity, 12 Months German UVV
  • English Operating Manual, Part List.

Always supplied with batteries, charger and 2 couplers. It is ready for immediate use

Multi Mover XL75 Power Tug Specifications

Download Manual - Multi-Mover XL75
  • 1500 W maintenance-free AC motor
  • 24 Volt, 250A Controller
  • Motor brake and an Electric magnetic brake
  • Differential drive
  • 12V 100 AH (2 batteries) Maintenance-free AGM
  • 24V 20A High frequency charger, external
  • Pull- and push capacity 7500 kg, Torque 4500 N
  • Solid tyres 12 cm width 6 Inch Rim, Continental SC20
  • Solid swivel double wheel castor, diam. 200mm
  • Ergonomic tiller head
  • Potentiometer, continuous
  • Battery Discharge indicator
  • Battery saving program
  • Emergency stop on motor casing
  • Lock with 2 keys
  • Speed forward and reverse: 0 through 5 km/h continuously
  • Minimum speed: 0.1 km/h
  • Weight 400 Kg ( more, up to 650 Kg weight is an option )
  • Width: 87 cm
  • Height: 100 cm (65 cm with folded tiller shaft)
  • Length: 170 cm (130 cm with folded tiller shaft)
  • Tow hitch or Ball Coupler
  • On the front side a 2x M10 thread has been applied for various couplings to be screwed on. On 20, 30, 40 and 50 cm height.
  • Two-years guarantee
  • CE Declaration of Conformity, 12 Months German UVV
  • English Operating Manual, Part List.

Always supplied with batteries, charger and 2 couplers. It is ready for immediate use

Operation

Operation elements

  • Safety switch (red) (Belly Button)
  • With the driving switch activated, pressing the safety switch (in case of crushing hazard) will immediately halt the Multi-Mover or make it move in the opposite direction until the driving switch is released.
  • Driving switches left and right from the centre.
  • Turning the switch forward with your thumb, you first select the drive direction. Turning it farther forward the Multi-Mover XL starts moving. Middle position is neutral.
  • Turning the switch downward the Multi-Mover XL will move backwards.
  • Continuous potentiometer
  • slide knob for continuously setting maximum speed from 0.1 to 5.0 km /h. Also at full speed you will be able to drive and manoeuvre accurately.
  • Claxon
  • Optionally also a claxon may be installed.

Tiller head

  • The tiller head serves for driving; you will find a freewheel handle, battery discharge indicator, charger plug and lock on the motor casing.

Operation

  • The Multi-Mover XL is easy to operate
  • The tiller shaft is hinged and can be folded in for storage or transport.
  • Operation of the XL75 and XL50 is the same as that of the XL35.

Multi-Mover XL Options

Tyres

By default Multi-Mover is delivered with normal pneumatic tyres and a hard rubber castor wheel.

However, we offer various tyre types as options. For interior and outdoor use and for all seasons. For tyres, please have a look here

Couplings

By default the Multi-Mover M is delivered with a ball and pin on 66 cm height. In case you wish a coupler on a height of  45cm (usual height for towing hook) or another coupling device, please have a look at Couplings here

Adjustable tiller shaft

  • Rotable over 90 degrees, to be tightened manually
  • Practical for caravans and containers.

Vertical tiller arm

Various RAL colours

  • Short turn radius
  • Length 110 cm (normal 170 cm)

Multi-Mover XL+ Alpine

  • Agrarian tyres 8 inch/23 cm width, 48 cm high
  • Double pneumatic castor
  • Maximum tow ball pressure 350 kg, 200 kg dead weight
  • Floor clearance 17 cm
  • Width: 95 cm, Length 174 cm
  • Couplers front from 21 cm to 51 cm
  • Coupler top from 54 cm to 82 cm

Internal charger:

  • Built-in charger with outlet and charging indication light.

Dirigible tiller head and castor

  • Provided with a gas spring and double castors
  • Turns around in its place
  • Length XL in this state is 100 cm (normally 170 cm)

Remote control

  • Forward and reverse
  • 2 speeds
  • For instance for pushing stacked shopping carts

Weight plates

  • For enhanced traction, maximally 200 kg
  • Top and side plates.

Weight plates

  • For work in shifts.

Plus - Various RAL colours, warning systems, claxon and a lot of other options.

Multi-Mover XXL

Download Manual - Multi-Mover XXL

Electric tractor up to 20,000 or 40,000 kg

Electric tugs for heavy industrial application

The Multi-Mover XXL enables you to easily move and manoeuvre heavy trailers or flatbeds over a level surface.  Due to special tyres and drive Multi-Mover XXL can also be used on slippery and dirty surfaces. You may use the Mover in the factory, in a depot, in a port, on the work floor and in many other locations.

No need to climb in a cabin, you can fix the job on your feet. You do not need a driving license for the our pedestrian electric tugs.

The Multi-Mover functions for two working days on 1 battery load and is multi-deployable, odourless, quiet and emission-free again after a 5h-recharge by means of the charger supplied with it.

Models XXL and 3XL

  • Multi-Mover XXL up to 10,000 kg with 8,900 Newton
  • Multi-Mover XXL up to 15,000 kg with 9,800 Newton
  • Multi-Mover XXL up to 20,000 kg with 11,000 Newton
  • Multi-Mover 3XL up to 40,000 kg with 17,500 Newton
  • Multi-Mover 3XL up to 80,000 kg with 34,000 Newton

Ziehhilfe

Watch more videos here

Multi-Mover XXL10 Pedestrian Tug

Multi-Mover 10,000 Kg specification

  • 4 kW maintenance-free AC motor, 36V 300A
  • Differential drive
  • Motor brake and an Electric magnetic brake
  • Maintenance-free 6 x 6V 240 AH battery pack
  • Twelve-month guarantee on batteries
  • 36V 20A High frequency charger, external. 200A/5H
  • Pull- and push capacity 10,000 Kg or 8,900 Newton
  • Solid rubber tyres Continental SC20
  • Solid double wheel castor
  • Ergonomic tiller head with emergency stop and claxon
  • Potentiometer, continuous
  • Battery Discharge Index and hours counter
  • Battery saving program and error indicator
  • Emergency stop on motor casing
  • The Multi-Mover automatically slows down when taking a bend
  • Speed forward and reverse: 0 through 5 km/h continuously
  • Minimum speed: 0.1 km/h
  • Weight 1050 kg
  • Width 96 cm
  • Height 82 cm, with raised steering head 138 cm
  • Length: 140 cm
  • Bar coupling
  • On the front side a 5 x M14 thread has been applied for various couplings to be screwed on. On various heights from 15 cm to 80 cm
  • 2 years guarantee
  • CE Declaration of Conformity, 12 Months German UVV
  • English Operating Manual, Part List.

Always supplied with batteries, external charger and bar coupling. It is ready for use!

Multi-Mover XXL20 Pedestrian Tug

Multi-Mover 20,000 Kg specification

Always supplied with batteries, external charger and bar coupling. It is ready for use!

  • 4 kW maintenance-free AC motor, 36V 300A
  • Differential drive
  • Motor brake and an Electric magnetic brake
  • Maintenance-free 6 x 6V 240 AH battery pack
  • Twelve-month guarantee on batteries
  • 36V 20A High frequency charger, external. 200A/5H
  • Pull and push capacity 20,000 Kg or 11,000 Newton
  • Solid rubber tyres Continental SC20
  • Solid double wheel castor
  • Ergonomic tiller head with emergency stop and claxon
  • Curve brake control software
  • Potentiometer, continuous
  • Battery Discharge Index and hours counter
  • Battery saving program and error indicator
  • Emergency stop on motor casing
  • Speed forward and reverse: 0 through 5 km/h continuously
  • Minimum speed: 0.1 km/h
  • Weight 2050 kg
  • Width 96 cm
  • Height 82 cm, with raised steering head 138 cm
  • Length: 140 cm
  • Bar coupling
  • On the front side a 5 x M14 thread has been applied for various couplings to be screwed on. On various heights from 15 cm to 80 cm.
  • Two-years guarantee
  • CE Declaration of Conformity, 12 Months German UVV
  • English Operating Manual, Part List.

Always supplied with batteries, external charger and bar coupling. It is ready for use!

Trailer-Mover XXL 20T

20,000 Kg specification

  • 4 kW maintenance-free AC motor, 36V 300A
  • Differential drive
  • Motor brake and an Electric magnetic brake
  • Maintenance-free 6 x 6V 240 AH battery pack
  • Twelve-month guarantee on batteries
  • 36V 20A High frequency charger, external. 200A/5H
  • Pull-and push capacity 20,000 Kg or 11,000 Newton
  • Solid rubber tyres Continental SC20
  • Solid double wheel castor
  • Ergonomic tiller head with emergency stop and claxon
  • Curve Brake control software
  • Potentiometer, continuous
  • Battery Discharge Index and hours counter
  • Battery saving program and error indicator
  • Emergency stop on motor casing
  • Speed forward and reverse: 0 through 5 km/h continuously
  • Minimum speed: 0.1 km/h
  • Weight 1200 kg
  • Width 150 cm
  • Height 82 cm, with raised steering head 138 cm
  • Length: 2800 cm
  • Hydraulic King Pin hitch from 70 cm up to 140 cm height
  • Two-years guarantee
  • CE Declaration of Conformity, 12 Months German UVV
  • English Operating Manual, Part List.

Always supplied with batteries, external charger and bar coupling. It is ready for use!

Multi Mover XXL and 3XL Operation

  • The Multi-Mover is easy to operate

Tiller arm head

  • Manoeuvring by means of the tiller arm head. The casing contains a battery-state indicator, an hour counter/error indicator, the charger plug and a lock.

Operation

  • The tiller arm contains a gas spring to adjust to desired height when driving.
  • Steering grip (black)
  • The steering grip is fixed to the Multi-Mover tiller arm. The tiller arm controls the castor wheel, allowing you to adjust manoeuvring.
  • Safety switch (red) Belly Button
  • With the driving switch activated, pressing the safety switch (in case of crushing hazard) will immediately halt the Multi-Mover or make it move in the opposite direction until the driving switch is released. The  will not move when the tiller arm is turned upward, in rest position.
  • Driving switches left and right from the centre
  • Turning the switch forward with your thumb, you first select the drive direction. Turning it farther forward the Multi-Mover starts moving. Middle position is neutral.
  • Turning the switch downward the Multi-Mover will move backwards.
  • Continuous potentiometer
  • Rotary control and for continuously setting maximum speed from 0.1 to 5.0 km /h.
  • There is also a potentiometer switch with 2 speeds.
  • At all speeds you will be able to drive and manoeuvre accurately
  • Claxon: by default present on XXL
  • You do not need a driver license to drive the Multi-Mover.

Options Multi-Mover XXL and 3XL

Couplings

  • By default the Multi-Mover XXL is supplied with a 20To Hitch and the 3XL with a 40To hitch.

Other options for the XXL and 3XL

  • Non marking tyres
  • Different Ral colour
  • Hydraulic lifting device B front
  • Hydraulic lifting device C mid
  • Remote control
  • Warning signals
  • Extra weight
  • ATEX  94-9-CE, Zone 1
  • ATEX  94-9-CE, Zone 22

Multi-Mover 3XL Pedestrian Towing Tractor

Multi-Mover 40 Tonnes (40,000 Kg) specification

  • 10 Kilo Watt 48 Volt AC electro motor maintenance-free
  • Differential drive
  • 400 Ah controller, programmable
  • Motor brake and an Electric magnetic brake
  • 8 x 6 Volt 240 Ah batteries maintenance-free  (16-20 working hours)
  • 48 Volt 40A external charger, high frequency
  • Solid rubber tyres Continental SC20
  • Traction roll capacity push and pull 40,000 Kg or 17,500 Newton.
  • Towing Hitch 40 To
  • Potentiometer continuous variable
  • Ergonomically tiller arm with emergency stop
  • Solid steering wheel with power steering
  • Curve brake control software
  • Maximum speed between 0 and 5 km/h (continuous variable)
  • Battery and hours indicator
  • Emergency button / stop
  • Full rubber solid tyres, 8 inch
  • Horn
  • Lock with 2 keys
  • Battery saving program
  • Weight 2900 Kg up to 40.000 Kg
  • Width 123 cm
  • Length 185 cm
  • Height 105 cm, Height with raised steering head 138 cm
  • 2 years guarantee
  • CE Declaration of Conformity, 12 Months German UVV
  • English Operating Manual, Part List.

Supplied with batteries, external charger and bar coupling. Ready for use!

The specs of the Multi-Mover 3XL+ with 34,000 Newton torque on request

Multi Mover XXL and 3XL Operation

  • The Multi-Mover is easy to operate

Tiller arm

  • The tiller arm is used for manoeuvring the multi-mover. The casing contains a battery-state indicator, an hour counter/error indicator, the charger plug and a lock.

Operation

  • The tiller arm contains a gas spring to adjust to the desired height when driving.
  • Steering grip (black)
  • The steering grip with bail is fixed to the Multi-Mover tiller arm, this controls the castor wheel allowing you to  manoeuvre the machine.
  • Safety switch (red) Belly Button
  • With the driving switch activated, pressing the safety switch (in case of crushing hazard) will immediately halt the Multi-Mover or make it move in the opposite direction until the driving switch is released. Thiswill not move when the tiller arm is turned upward in rest position.
  • Driving switches left and right from the centre
  • Turn the switch forward with your thumb, you first select the drive direction. When turning it further forward the Multi-Mover starts moving. Middle position is neutral.
  • Turning the switch downward will move the Multi-Mover backwards.
  • Continuous potentiometer
  • Rotary control and also for continuously setting, maximum speed from 0.1 to 5.0 km /h.
  • There is also a potentiometer switch with 2 speeds.
  • At all speeds you will be able to drive and manoeuvre accurately
  • A horn is fitted on the XXL
  • You do not need a driver license to drive the Multi-Mover.

Options Multi-Mover XXL and 3XL

Couplings

  • The Multi-Mover XXL is supplied with a 20To Hitch and the 3XL with a 40To hitch.

Other options for the XXL and 3XL

  • Non marking tyres
  • Different Ral colour
  • Hydraulic lifting device B front
  • Hydraulic lifting device C mid
  • Remote control
  • Warning signals
  • Extra weight
  • ATEX  94-9-CE, Zone 1
  • ATEX  94-9-CE, Zone 22

Contact Us

Multimover U.K.
A Division of:
The Pontoon & Dock Co Ltd
Unit 7
Rodenhurst Business Park
Rodington, Shrewsbury
SY4 4QU

Chat with Us: 01952 771264
Mobile: 07930 353241

sales@multimover.co.uk

Brought to you by

The Pontoon & Dock Company logo